avago technologies - 1 - description the avago ACFM-2021 is a highly miniaturized diplexer designed to allow a common antenna to be used for simultaneous reception in band 4 (2110 mhz to 2170 mhz) and band 25 (1930 mhz to 1995 mhz). this diplexer also enables co-banding between umts bands 1 and 4. in addition to maintaining hi gh isolation between band 1/4 and band 25 rx signals, the ACFM-2021 also provides high rejection of nearby interferers to minimize the opportunity for intermodulation products. low insertion loss in the rx pass bands maximizes receiver sensitivity. the ACFM-2021 is designed with avago technologies' innovative film bulk acoustic resonator (fbar) technology, which makes possible ultra-small, hi gh-q filters at a fraction of their usual size. the excellent power handling capability of fbar bulk-mode resonators suppor ts the high linearity needed in mobile communications applications. the ACFM-2021 also uses avago technologies' advanced microcap bonded-wafer, chip scale packaging technology. this process allows the filters to be assembled into a molded chip-on-board module with an overall size that is compatible with standard 1.4 mm 1.8 mm duplexer/diplexer pcb footprints. features ? miniature size 1.4 mm 1.8 mm size 0.80 mm maximum height standard 1.4 mm 1.8 mm pcb footprint ? all ports 50 , no external matching needed ? allows co-banding between umts bands 1 and 4 ? environmental rohs compliant halogen free tbbpa free applications smartphones, tablets, and mo bile/portable communications devices simultaneously receiving umts bands 1/4 and band 25. functional block diagram ordering information part number number of devices container ACFM-2021-blk 100 tape strip or anti-static bag ACFM-2021-tr1 3000 178 mm (7-inch) reel # b o e 3 y 1 p s u 1 j o " o u 1 p s u 1 j o # b o e 3 y 1 p s u 1 j o ACFM-2021 umts band 25 C band 1/4 rx antenna diplexer product brief
avago technologies - 2 - ACFM-2021 product brief package dimensions and marking specification package dimensions and marking specification 0.450 0.270 0.300 0.270 pad 1-8 detail 0.025 x 45 (4x) unless otherwise specified: 1. dimensions in millimeters 2. dimensions are nominal 3. tolerance: x.xx 0.05 mm x.xxx 0.025 mm 4. angles 45 5. contact areas are gold plated gnd 1.800 0.050 0.80 max gnd 1.400 0.050 1.650 top view bottom view side view gnd 1.2 50 b1/4 rx (pin 1) gnd gnd b25 rx (pin 7) ant (pin 4) (gnd) 0.825 0.625 center pad 9 detail (4) (9) (6) (7) (8) (1) (2) (3) (5) 0.075 0.050 all around pin 1 mark 0.10 x 45 (aligned to pin 1) lyw xxxx package marking: a = avago technologies l = ACFM-2021 y = year, last digit w = work week (refer to appendix a) xxxx = lot number
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. all other brand and product names may be trademarks of their respective companies. data subject to change. copyright ? 2015 avago technologies. all rights reserved. av02-4909en C 2015-05-01 pin description pin connection 1 bands 1/4 rx 4ant 7 band 25 rx 2, 3, 5, 6, 8, 9 gnd
|